按钮电池（LR/SR44）外壳，用于Nerf Nemesis

button battery (LR/SR44) housing for Nerf Nemesis

2023-09-06 19:23:43

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

After I was finished rewiring my Nerf Nemesis, I put the old battery springs to good use and wired them up to a LED circuit running two lights for a cool fire-breathing effect in my blaster. This is an incredibly specific design so I'll be pleasantly surprised if anybody ever uses it. At any rate, enjoy!

This is to house 4 1.5V SR/LR44 batteries, commonly used in tea lights and digital calipers. It uses the stock battery springs repurposed from the Nerf Rival Nemesis blaster to hold the batteries in place and provide contact points for a circuit. These are perfect for 2 LED's in series. No need for resistors needed!

The batteries are inserted in the slot on top and slid into position. You will have to use a pair of tweezers to do so. You can then insert the battery springs for a snug fit that's easy to undo when the batteries need to be replaced.