CMON 铁 Maiden 艾迪·弗莱包装存储

CMON Iron Maiden Eddie figure pack storage

2023-09-06 19:24:09

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Storage for the CMON Iron Maiden Eddie crossover minis.

I store the cards with the individual game, and keep all the figures stored in one box (the smallest of the 3 main packs) to reduce as much space as possible on my game shelf.

This was a quick insert I put together to store the minis.

The two squares on the right side (as pictured) are larger than the rest to fit the 2 minis with larger bases.

I printed with 0 top and bottom layers (using 50% infill) to reduce filament usage. Should be plenty strong plus I'm not planning on removing the insert from the box. Obviously should print fine with top and bottom layers.

I was able to print as one piece on my Ender 3v2. The longest side is 19cm so printers with smaller build plates would need to split it before printing.

This is my first completed design so if you use it please let me know, and constructive feedback is always welcome.