GKR 重型攻击者 (零售基地 + 城市废墟 + 甜咸味道) 单盒整理器

GKR Heavy Hitters (retail base + urban wasteland + sweet and salty) single box organizer

2023-09-06 19:24:34

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is an organizer for the GKR Heavy Hitters board game which draws inspiration from https://www.thingiverse.com/thing:5956625 and https://www.thingiverse.com/thing:3766815

It squeezes the retail versions of the base game, Urban Wasteland expansion, Sweet and Salty, and the dice from the Hapsi can into the base game box with a small amount of lid lift.

Notes:

The cardboard buildings and other duplicate components have been left out and replaced with the plastic ones from the Urban Wastelands Expansion.

The card trays are designed for cards sleeved using Sleeve kings (63.5x88mm) 60 micros.

The retail version of GKR ships with the cardboard player boards, there is still a little room to spare at the front of the box so it's possible the plastic player boards could be made to fit with some tweaking.

In order to print the support tray I had to split it into two pieces, this seems to work fine but the full length STL is also included.

The box for the building bases is 130mm tall, when the rules and other boards are placed in the box this seems to work fine in terms of lid lift, but I've included a 120mm tall version (untested) as well which should give a slightly more level finish, although it might be a bit of a squeeze getting the bases to fit so YMMV.

Print Settings

Printer:
Bambu P1P
Rafts:
No
Supports:
No
Resolution:
0.28mm
Infill:
15%
Filament brand:
eSUN
Filament material:
PLA
Notes:
printed using the extra draft 0.28mm setting, for the support trays I used the honeycomb infill pattern with no top or bottom layers to save on filament.