微型瑞士NG版定制简便易损风扇罩

Micro Swiss NG Custom Easy Janky Fan Shroud

2023-09-06 20:58:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This custom fan shroud is a simplified version of the Micro Swiss Ender-3/CR-10 NG Fan Shroud. I was not happy with the original fan shroud because replacing the nozzle from the heater block was difficult and annoying.

This design exposes the heater block and the nozzle for easier access and modification.
The silicone sock of the heater block has been removed for better display.

This custom fan shroud is suitable for printing PLA, PETG or TPU or other filaments, which require active cooling.

I don't recommend this fan shroud for high warping filament like ABS, ASA, Nylon, etc. because the heat sink cooling fan cools the printed part a little bit from above.

The assembly steps are the same like the original Micro Swiss Ender-3/CR-10 NG Fan Shroud.

Print Settings

Rafts:
No
Supports:
Yes
Filament brand:
extrudr
Filament material:
GreenTEC Pro
Notes:
0.6mm nozzle
Use a filament with high heat resistance like GreenTec Pro from extrudr.