Thermaltake V1迷你ITX机箱排气风扇支架

Exhaust Fan Riser for Thermaltake V1 Mini ITX PC case

2023-09-07 17:35:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I designed this to replace the clear plastic cover at the top of the PC case. It adds almost 1inch of height to the case it provides more clearance for the tubes from my Thermaltake TH AIO pump cooler and it has standoffs for a 120mm case fan.

It has venting along the sides and back. Normally I wouldn't leave these open but mine is stored under a desk and is relatively protected.

I recommend printing this upside down with supports for the rails. Make sure that your print bed is very level and clean for this one to ensure that it prints all the circles/holes correctly.