一枚戒指 - 双层打印与石板复合结构 - Hueforge 打印技术

One Ring - Dual Print and Lithopane - Hueforge Print

2023-09-07 20:54:12

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The One Ring (Dual Print and Lithopane)

This Hueforge print is both a front-lit filament painting (normal print), but also a half lithophane. When backlit, the writing on the ring glows. A two-for-one! See images for an example.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA META Sunlu White Transmission Distance: 9.6
PLA Siddament Black Transmission Distance: 0.2
PLA+ Sunlu Coffee Transmission Distance: 3
PLA META SUNLU Yellow Transmission Distance: 8
PLA Siddament Black Transmission Distance: 0.2

Swap Instructions:
Start with White
At layer #6 (0.56mm) swap to Black
At layer #11 (0.96mm) swap to Coffee
At layer #18 (1.52mm) swap to Yellow
At layer #25 (2.08mm) swap to Black for the rest.

Your filament settings and mine may differ in TD, so best to adjust yours according to your known TD filaments.