Zeus与巨人的石雕刻 - Hueforge 打印

Zeus and the Giants (Stone Carving) - Hueforge Print

2023-09-07 20:54:12

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Zeus and the Giants

This was printed with a 0.2 nozzle, which produces 0.04mm layers a little nicer. It is possible with a 0.4 nozzle, though you will need to have calibrated your printer and filaments very carefully.

You can however, still print this with a 0.4 nozzle and change the layer height to 0.08mm, by just adjusting the .hfp file.

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
PLA Siddament Black Transmission Distance: 0.2
PLA+ Sunlu Coffee Transmission Distance: 3
PLA Sunlu Beige Transmission Distance: 8.2
PLA META Sunlu White Transmission Distance: 9.6

Swap Instructions:
Start with Black
At layer #24 (1.08mm) swap to Coffee
At layer #28 (1.24mm) swap to Beige
At layer #43 (1.84mm) swap to White for the rest.

Your filament settings and mine may differ in TD, so best to adjust yours according to your known TD filaments.