堆叠小型容器模型

Stacking Small Parts Bins

2023-09-07 21:20:52

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I know full well there are other very similar models available but I wanted to work on my design skills with TinkerCAD to produce a design of my own. The result is a nicely organized set of bins for use on my workbench when doing woodwork, repairing appliances, or basic gunsmithing/cleaning.

The basic bin's interior dimensions are 60mm x 60mm x 60mm. The outer dimension adds the upper stacking rim dimensions. The half size bin is sized so that two such bins stack to match a single 60mm bin high.

The bins can stack with or without lids installed.

There are three tray options so you can print what you need and then glue them together. For my use I printed one 1x2 and one 2x4 and glued them together to make a 2x6 - my print bed isn't big enough to just print a 2x6 in one piece.

Two lid options are available: one with square corners and one with rounded corners. I use the rounded corner lids as they go on easier and I like the look.