DustSwitch 100mm v2

DustSwitch 100mm v2

2023-09-07 22:42:29

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

DustSwitch 100mm v2

DustSwitch 100mm v2

Summary

Version 2 of my Rotary Y-switch 100mm/4in dust collection systems.
(version 1 here: https://www.thingiverse.com/thing:5774107)

Should have no problems with clogging of any kind.

Notes:

There are multiple connector sizes included. They are all named with their OD. I have also included a F360 file so you can tweak it to fit your pipes perfectly
Model is built with 0.15mm clearance between all moving surfaces.
Uses screws and captive (non-locking) nuts. You will need 24pcs M4x10mm and 1pc M4x30
The core upper & lower and the housing upper & lower are all intended to be glued. They all align with 3mm dowels and the holes may need drilling out to get a perfect fit. You will need 9pcs 3x<20mm
I drilled out using a 3mm bit and used 3x18mm steel pins and I honestly think I wouldn't have needed glue -especially as the duct connectors hold the housing parts together anyway.

Print Settings

Printer:
Bambu Lab X1 Carbon
Rafts:
No
Supports:
No
Infill:
15%
Filament brand:
Fiberlogy
Filament color:
whatever
Filament material:
Impact PLA
Notes:
See the slicer screenshots for the intended orientation of each part

Tags

cyclone separator dust dust collector dust extraction exctractor woodworking

License

CC BY

DustSwitch 100mm v2
by f5designstudio is licensed under the Creative Commons - Attribution license.

DustSwitch 100mm v2

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

最新模型