RGB色彩分区灯具（WLED）

RGB Voronoi Lamp (WLED)

2023-09-08 00:45:37

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Simple ESP based RGB lamp with Voronoi Shade that can be controlled via Wi-Fi.

My video about this project: https://youtube.com/shorts/o-M_Fgu40zc?feature=share

Parts List:

1-2m Addressable 5V RGB Strip ( I used about 1.1m of WS2812B 60 LED/m strip )
Some M3 Screws
ESP8266 with Installed WLED ( Can also be ESP32 )
5V Power Supply ( I used 1,5A Smartphone Charger with USB cable )
Mini Rocker Switch ( Mounting hole is 13.3 x 8.6mm )
USB C Female Connector

“Base” and “Voronoi Shade” components should be printed in a standard mode, “Vase Shade” and “Vase Tower” parts should be printed in Vase Mode. I used 0.6mm nozzle for printing the Shade, but if you want more light to come through, use narrower nozzle like 0.4mm. Important, for the “Vase Tower” increase the number of bottom layers to 14 if printing at 0.2mm layer height.