时尚的Landroid轮子

Stylish Landroid Wheels

2023-09-08 04:04:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

After about 4 years in my rough garden, it was time to replace my previous wheels (thing:3750909). This time I did not care about material saving, print time or anything like that, I just wanted to make some nice looking wheels!

From my previous design, I extracted the studs and then made a new design based on common aluminum wheels for cars. When it was done, I also made a cap to cover the nut holding the wheel.

Tested on Worx Landroid WG709e and on WG790e.1. It can probably be adopted to other mowers as well without any big issues.

The cap snaps in place, but has a tight fit and brittle tabs so take it easy when mounting them. I added some slots to fit a screw driver when they need to come off.

Print Settings

Printer brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0,15 mm
Infill:
20%
Filament brand:
Prisament
Filament color:
Galaxy black
Filament material:
PLA
Notes:
Should not need support more than for the big hexagon, rest of the print is fine without support.