Wii传感器壁挂架

Wii Sensor Bar Wall Mount

2023-09-08 04:44:13

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a wall mount for a Wii sensor bar using large Command strips (not an affiliate link). It has a pocket for the command strips to be hidden. It needs to be printed with a decent amount of support for the pocket, but that gives a nice rough surface for the Command strip to stick to. Plus, if your printer is better than mine at bridging you should be able to print it without supports. Walls and infill are to your preference, but I did three walls and 10% gyroid infill and it was solid. Each pocket is .75" x 4.5625" x 0.1" deep if you want to cut down other styles or brands of adhesive sticks. The depth is meant to use the Velcro-style strips so there aren't any ugly tabs hanging out anywhere. I used PLA, and it stuck fine. Not sure about other plastics, but I am sure PETG and ABS/ASA would probably be fine as well. PP doesn't usually like things being stuck to it.