丰田汽车品牌标志

Toyota Badge

2023-09-08 05:11:05

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

2 models included. Both models are the same size: 109.64mm x 74.75mm.
Print came out to exactly 109.5mm x 75mm as measured with calipers once lightly sanded.
I spent a lot of time to make sure this was as close to the stock part in every way. Technically the stock part is 109.5mm x 75mm. This is about the thickness difference of 3 sheets of notebook paper.

Fits FRONT emblem off a 2012+ FR-S, 86, GT-86, BRZ.
Fits REAR emblem off a 2012/2013 Toyota Corolla.

Toyota Badge (Concave Base) 109.64mm x 74.75mm.stl
*Concave base for mounting on modern Toyota hoods and trunks which have a slight convex bend to the area under the badge. (Recommended version for hood and trunk badges)

Toyota Badge (Flat Base) 109.64mm x 74.75mm.stl
*Flat base for mounting on a perfectly flat surface.