Menards魔法花园拱形结构连接器

Arbor connectors for Menards Enchanted Garden Arbor

2023-09-08 05:51:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Connectors if one wanted to attach two or more arbors together. Specifically the Enchanted Garden 78H x 52W Black Mission. Model Number: 84303MN. Menards ® SKU: 1713414

Print two Arbor Ends. You can do more but it isn't easy trying to attach with all seven connecting points.

Pull the rubber caps off the four upper outer squares where the arbors will connect.

Slide the Arbor Ends onto one of the arbors. Align and slide the other arbor into the other opening of the arbor ends

Print four, or more, but even amounts by two if wanting more, Arbor clamps. Use 4 wall loops or more since you want it beefy so as to not break when moving around the two connected arbors. I used honeycomb for infill.

Snap two Arbor clamps on each side where the two arbors will connect

Print Settings

Printer:
BambuLab P1P
Rafts:
No
Supports:
No
Resolution:
Fine or Optimal
Infill:
35%
Filament brand:
SunLu
Filament color:
Any
Filament material:
PLA+ or PETG
Notes:
4 wall loops
No support needed.
Shouldn't need and skirt or brim

Made because the arbor that was wanted was not stocked so bought two smaller arbors and hey, there is a 3D printer right there and I can connect them utilizing it :D