TTm 消防员 1000mm 狭窄轨道箱型货车 99-01-80（复合材料重新设计 1/120 比例）

TTm fire fighter 1000mm narrow gauge boxcar 99-01-80 (Resin redesign 1/120 scale)

2023-09-08 22:30:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

TTm 消防员 1000mm 狭窄轨道箱型货车 99-01-80（复合材料重新设计 1/120 比例）

Summary

When I published my equipment car / boxcar first in October 2022, I was new in 3D modeling and fare away from resin printing.

On demand of a friend, I remade this car from scratch and with the help of my latest models and new designed wheel bearings – here we have the

TTm equipment car 99-01-80

And sure - the main reason for this remake - the H0m version is available here.

History

The historical car was built in 1899. The source [1, p. 200] mentioned 2 similar vehicles. The source [2, p. 144] mentioned NWE numbers from 311 to 314, a count of 4 cars. I come back to this topic on another page.

Wagon NWE 312 was numbered 99-02-02 in 1957 and repurposed in 1965 as equipment wagon for the fire fighters and got the new number 99-01-80. [2, p. 146 and footnote on p. 148]
I’ve got some pictures, so we now have the real random window deployment starting around from brakeman seat counterclockwise:

with 3 parts (the village house window),
old ventilation slit and missing logs closed with a glass (the ugly window),
a single part window (you find older pictures with a window with 2 parts at this position in [2, p. 143]) (the Muppet show window) and
finally, a closed ventilation slit.
On the brakeman’s side is a hole for a pump hose and at the sides 2 more holes near the floor. These holes can be closed from the inside, so I made them in closed state.

Printing

These files should be printed in resin. I strongly recommend ABS like resin. I print the boxes flipped over (135 degrees).

Post printing

Guitar strings were used for the handles, bent and glued in place. I create break handles from brass wire and sheets.

I use 5.6mm N gauge wheel sets and insert them after a dark primary paint layer, before spending to much time in painting. Even ABS like resin breaks. You can widen the cones with a drill (opening angle 60-70°)

Windows are from clear plastic glued in from the inside.

Origin and licensing

The design is based on [3] p. 34 and pictures made + found by Julius.

I don't want any commercial use of this design and prints.

You are free to print my work for your projects, close friends and maybe your model railway club. Please post your makes.

If you are representing a model or railway club, a school or something comparable with these and want to use it for educational purposes in higher numbers, please tell me.

Sources

[1] Kieper, K., Preuß, R. & Rehbein, E. (1980). Schmalspurbahn-Archiv. Berlin, Transpress, Verlag für Verkehrswesen.
[2] Zieglgänsberger, G., Röper, H. (1999). Die Harzer Schmalspurbahnen: Die Selketalbahn ; die Harzquer- und Brockenbahn ; die Südharzeisenbahn (Transpress spezial, 1. Aufl.). Stuttgart: Transpress.
[3] Ort I.(1988): Ein Feuerlöschzug in der Nenngröße H0m. In: Modelleisenbahner 2/88. Transpress Berlin. p.34f.