3dsjs

USB接口插头(配备移除工具)

USB Port Plug with Removal Tool

2023-09-09 03:16:35

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发送),感谢理解带宽压力,超过1小时没收到,请联系我们
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

Created a USB Port Plug with a Removal Tool. This is to be used in Data Centers or equipment that is always on. It helps to keep the USB Ports clean of debris and dust. I have had multiple USB ports get shorted out. They were just dusty. So I created this. Cheap and efficient.

Updated the Removal tool to have a longer reach and I closed one side of the receiving insert so you don't slide off the USB Plug.

Print Settings

  • Printer brand:

    Creality

  • Printer:

    Ender-3 v2

  • Supports:
    Yes
  • Resolution:
    0.2
  • Infill:
    100
  • Filament brand:

    Geeetech

  • Filament color:

    Black

  • Filament material:

    PLA

  • Notes:

    When printing these smaller items I use KAIZUO Glue Sticks on the plate.

    I print the Removal Tool with supports because of its shape. I usually start supports at about 50 degrees.

    I print the USB Plug without supports. They have been printing just fine.

Post-Printing

Removal Tool use

The Removal Tool is snug on the USB Plugs. I usually give each plug a slide of the tool. I print the tool with 5 USB Plugs usually. This allows the tool and plugs to get a little wear on them so they slide together pretty easily.

Tags

License

CC BY

USB Port Plug with Removal Tool
by bg-thingmaker is licensed under the Creative Commons - Attribution license.

USB接口插头(配备移除工具)
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

猜你喜欢