BTT智能纤维元件传感器直接安装型适用于Sprite Pro

BTT Smart Filament Sensor Direct Mount For Sprite Pro

2023-09-09 12:34:44

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Seems like no one had made a Direct Sprite mount for that sensor, so I decided to make one.

I had an issue with the sensor when it was mounted way too far away from the extruder, so there was a lot of slag. About 20 cm of filament between the extruder and the sensor, so it was constantly pausing, assuming it's jammed. I had to crank up the run out distance so high that it wasn't'smart'' sensor anymore.

With this mount u can keep the recommended 7 mm Run out distance and the sensor works like intended (personally I use 10 mm)

No additional hardware needed, you use the 4 screws that came with the Sprite, and just screw the mount on the side of the extruder with the original extruder screws. Everything should fit together like a glove.

I decided to add the whole extruder model and the basic casing too, in case someone wants to remix parts, for example, add a V Knob back of the basic case and insert in somewhere in the V profiles.

Every model I upload comes with the Step files, I believe it helps the community.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
Yes
Resolution:
0.20
Infill:
100%
Filament brand:
Polymaker
Filament color:
Charcoal Black
Filament material:
PLA
Notes:
I used 100% infill just to make sure it's not so wobbly. 20% most likely works fine too.