华为HG8145V5V3光纤接入终端模块
wall mount Huawei HG8145V5V3 Modem ONT (TELMEX infinitum fibra)
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
Este es un soporte de pared para el modem de TELMEX infinitum Fibra.
Encaja bien dentro del soporte, tiene los huecos para tener acceso a los puertos inferiores, las 2 antenas, los agujeros reset.
La montura a pared la hice con dos pestañas para aprovechar los huecos en mi pared.
Si lo necesitas sin las pestañas dimelo y subo una versión sin pestañas.
Igualmente si quieres una versión sin las letras infinitum y TELMEX, dimelo y lo subo, o cuando tenga tiempo actualizo la Thing.
A la hora de colocar el modem, primero debes pasar el cable de fibra optica,(CON MUCHO CUIDADO, la fibra es muy delicada), por debajo hacia arriba,(dejé una ranura donde pasa el cable). y despues conectarlo al modem y ya insertas el modem en el soporte.
This is a wall mount for the TELMEX infinitum Fibra modem.
It fits well inside the support, it has the holes to access the lower ports, the 2 antennas, the reset hole.
I made the wall mount with two tabs to take advantage of the gaps in my wall.
If you need it without the tabs, tell me and I'll upload a version without tabs.
Likewise, if you want a version without the letters infinitum and TELMEX, tell me and I'll upload it, or when I have time I'll update the Thing.
When placing the modem, you must first pass the fiber optic cable (WITH VERY CAREFULLY, the fiber is very delicate), from the bottom up, and then connect it to the modem then put the modem into the printed wall mount. Now you can connect the power cable, ethernet cables.
Print Settings
- Printer brand:
Prusa
- Printer:
I3 MK3S
- Rafts:Doesn't Matter
- Supports:Yes
- Filament brand:
XINGTONGZHILIAN
- Filament color:
Black
- Filament material:
PETG
- Notes:
Debido a la forma del modem , si o si necesitas soportes, anexo una imagen para que vean como lo posicioné en el slicer, no es la definitiva, encuentra la mejor forma para ti.
yo usé 0.30mm Draft porque necesitaba rapido la pieza.
Due to the shape of the modem, supports are necessary, I attach an image so you can see how I positioned it in the slicer, it is not definitive, find the best way for you.
I used 0.30mm Draft because I needed the piece quickly.
Tags
相关内容
猜你喜欢
联系我们
最新模型
-
静音无空气乒乓球球拍,低噪音2025-06-21
-
智能路甲车通风控制杆2024-05-08
-
Zyn/Chino容器罐2024-05-06
-
行走者之车曲奇切割器2024-05-06
-
CR阿佩克斯3D模型遮阳结构箱体(前置或后置)2024-05-06
最热下载
-
苹果 HomePod mini壁挂装饰2024-03-19
-
FFBeast仿真飞行器模拟轮部件2024-04-19
-
俄亥俄州日全食针孔观察器2024-05-03
-
Enders 3版控制面板2024-05-08
-
中指2025-05-17