PT111 / Taurus 弹匣发射紧张机构 3D 模型
PT111 / Taurus Magazine Release Tensioner
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is useful when your ADDITIVE MANUFACTURED Taurus magazine release is not holding your magazine well or not at all. It is adjustable by the way of cutting it from the wide top down till you reach the adequate tension. Less is more if you somehow install this without trimming it you will have a really hard time removing it again, LESS is MORE cut it pretty small and work your way up from there( it takes like 5 minutes to print another don't get it stuck in your gun). I don't know if this will work in off the shelf ones.
I'M NOT RESPONSABLE IF YOU USE THIS AND DAMAGE YOUR STUFF, use your brain.
Thanks.
Print Settings
- Printer brand:
ELEGOO
- Printer:
ELEGOO NEPTUNE 3 Pro
- Rafts:Doesn't Matter
- Supports:Doesn't Matter
- Infill:100%
- Filament brand:
PolyMaker
- Filament color:
Whatever you feel
- Filament material:
PLA, PLA+ etc (something stiff obv)
- Notes:
This is super easy to use you install this onto the spring that holds your mag release in the magwell and then install the spring into its hole and snap the top into the magazine release capturing it in place. LESS IS MORE. Thanks.
License
PT111 / G2C Taurus Magazine Release Tensioner
by napalmzz is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
热门推荐
-
超酷的飞鱼式飞翼模型，无需胶水，快捷连接2023-03-27 -
二战时期德国的可移动防弹室3D模型2023-03-28 -
卫星天线接收器支架2023-04-04 -
负数块键盘升起2023-04-26 -
中世纪风格拉链2023-05-06
最热下载
-
全能3D打印机测试2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
GPD Win3 把手型号2023-04-07 -
Apple鼠标 - M0100 3D模型2024-03-25 -
GTA 5 大地图模型2024-04-21
最新模型
-
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
hgx挤出机头火炮响尾蛇 X3 SWX3 HGX lite 2.002025-07-18 -
Yeezy Foam Runner Adidas运动鞋2025-07-16 -
艺术雕像（女性）2025-07-16