Creality 5瓦激光切割机线性轨道固定架

Creality 5w Laser Cutter Linear Rail Mounting Bracket For Ender 3 S1/Pro

2023-09-09 16:13:25

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

So you bought yourself an x axis linear rail kit for your Edner 3 S1 (or S1 Pro) and the realized the mounting hardware that comes with your 5w laser module doesn't work anymore. Fear not! This is the solution. It is a slide on bracket that secures with a single screw and allows quick, easy and Z adjustable mounting of the laser module. You also don't have to remove stock sprite extruder to mount the laser module which is a bonus!

The focus of this design is on studiness over weight/plastic saving, I may come back with a v2 that adds some "lightness" to the design but to be honest you print it once and then its done.

The screw hole on the back is deisgned for an M3 8mm bolt. Note when the bolt is screwed in it simply hooks behind part of the print head carridge to stop it from sliding off hence the hole is reasonably large to allow the screw to turn easily, you don't need to screw it in tight.

I've included photos of the rail kit I used, its one of the generic ones comonly found on sites like AliExpress and Amazon.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 S1 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
20%
Filament brand:
Sunlu
Filament color:
Black
Filament material:
PLA Meta
Notes:
Align print to build plate on large flat back surface, print with supports (I used touching base plate and zigzag in cura).