Guardian Amiibo展示基座（Zelda Breath of the Wild）

Guardian Amiibo display base (Zelda Breath of The WIld)

2023-09-10 01:14:54

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Guardian Amiibo展示基座（Zelda Breath of the Wild）

Summary

A kitbash base for the Guardian amiibo figure from The Legend of Zelda: Breath of the Wild.
The debris under the guardian always seemed as part of something bigger and the articulated legs called for something to stand on.

Overall I'm quite happy with the result, with the debris sitting nicely on top of the print, the amiibo base being completely level and the overall size being on par of the original figure.

Three models uploaded, the complete one, with the base & debris cut-outs, one with only the amiibo base cut-out (for other amiibos) and a base with no holes, in case anyone wants it for something else.

Print Settings

Printer brand:
Anycubic
Printer:
i3 Mega
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
10%
Filament brand:
No_idea
Filament color:
white
Filament material:
PLA
Notes:
Printed on white PLA because I didn't have enough gray filament and afterwards realized the cylindrical cut-out was 1mm too narrow, so I had to widen it with a heat gun (the uploaded model was fixed afterwards and should be wide enough).

Fits on a 13cmx13cm base.

How I Designed This

Quickly designed the base in Tinkercad using the wonderful crater by Rob_Jedi & dmillercg as a main platform and the cobblestone base by bluegearstudios & Oldtowner as a fitting surface.

Tweaked the height and scale of both designs to fully ~~hide~~ accommodate the ~~hideous~~ protruding amiibo base, and added some barely noticeable cut-outs to better integrate the existing cobblestone debris.

The editable model is available either way, in case your figure has some sightly different geometry and you find it would collide with the print or in case you want to use it for something else.

https://www.tinkercad.com/things/dAh5OsLc0re-guardian-base