Gottlieb螺旋式固定架 (A-15409)

Gottlieb Coil mount bracket (A-15409)

2023-09-10 02:08:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a replacement for the Coil mount brackets used in Gottlieb machines. It's part number A-15409.

https://www.marcospecialties.com/pinball-parts/A-15409

It's not an exact replica but it works. I suggest printing it so the face with the threaded holes is on the bed. Use the lowest layer height your printer can do for the layers up to the threads and then print the rest at 0.2mm for speed. This will give you the best quality threads which is necessary because there are no threads on the brackets you will be attaching this part to.

I have not tested these beyond making sure they fit so I cannot say anything about their longevity. I can update this post once I've had a chance to use them for a while.