Voron 2.4 无坠落喷嘴清洁刷

Voron 2.4 "Crash-Free" Nozzle Brush

2023-09-10 04:35:18

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Unlike other Voron 2.4 nozzle brushes, this one sits almost flush with bed - the extruder never crashes into the brush.

When searching for a Voron 2.4 nozzle brush mod I noticed that the available mods stick up from the bed high enough to interfere with the extruder's movement - when the extruder moves at the very back of the bed, including knocking the Klicky/Euclid probe off the extruder.

This nozzle brush sits almost flush with bed - so the extruder never crashes into the brush.

Unlike other nozzle brush mods, this one does not have a bucket. I decided to omit the bucket because the bucket tends to take up too much space that may be needed for other mods - and because under normal conditions there is hardly any plastic brushed from the nozzle anyway.

Instructions and up-to-date files are available here https://makerspet.com/blog/voron-2-nozzle-brush/

If you are reasonably pleased with this mod, please leave a like to help others discover this contribution!