海王星3 Pro金属架架钩

Neptune 3 Pro Wire Shelf Clip for Screen

2023-09-10 11:15:53

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a clip for the magnetic screen that comes with the Neptune 3 Pro so that you can mount it on wire shelving units (it also works for the Neptune 3). My unit has edges that are 32mm thick with 6mm bars along the top and bottom. Seems pretty standard to me, but I know that this can vary depending on manufacturer sometimes.

I used M3*20mm bolts and nuts to secure it, but my bolts were snug enough that I could've left out the nuts if I wanted. However, it might be a good idea to modify it to use the original bolts that came with the printer, which I think are M4 bolts. Heat inserts might also be good alternative, but that would be overkill for this application. I might also make it to where the nuts sit flush with the surface of the model so it looks better. If I have time, I will reupload with these changes.

I remixed this from the Wire Shelf Spool Bracket by vtcgeek and the Neptune 3 Pro Display Stand by Goose98.