RTI斜坡（可变形斜坡）

RTI ramp (flex ramp)

2024-01-04 21:53:25

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

1/18 Rti Ramp (Ramp Travel Index) or flex ramp for RC crawlers.

Requires 8x M2 screws to assemble
I sanded my driving surface to make sure my tyres can grip it
Measure from the hub down to the ramp surface. My Stock Trx4-m made 35mm from the ground to the ramps driving surface.

22.5° angle from the ground
215mm long
85mm tall at the end

The sides should match up with the ramp surface and they should sit 90° from the surface they sit on. The little cylinder is to go in the bottom corner to stabilise the sides.