奇幻酒馆1 - 适合小型打印机

Fantasy Tavern 1 - Split for smaller printers

2024-01-05 00:44:42

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

抖音私信 @jobsfan

This is just the beautiful model of a tavern split up to fit smaller printers.
So on my 222x222mm printer those print beautifully.

Since cura had some issues with the big stl-size of the roof-2 and roof-3 there are also .obj files which seem to work fine.

Printer brand:
Anycubic
Printer:
Kobra 2
Rafts:
No
Supports:
Yes
Infill:
20
Notes:
I had some really big issues printing the roof, so I would recommend to turn off "Drop to build plate" and lift the models 5mm off the build plate, set the "Support Placement" to "Touching Buildplate" and the "Support Overhang Angle" to "10".
This will make sure the whole model gets supported and having it on supports above the build plate compensates for some warping, so when you remove the model from the support it is completely flat.