HORL 2 小刀适配器

Horl 2 small knife adapter

2024-01-05 03:06:48

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is an adapter for the Horl 2 magnetic support to stabilize small knives. The rubber feets are still functionnal.

It is based on the model "Horl 2 Adapter small / narrow knife 2.0" by fiotop but I remodeled it because I found that it was too tight. Thank you fiotop for the initial design.

Print Settings

Rafts:
No
Supports:
No
Resolution:
Half the nozzle height
Infill:
20 %
Filament brand:
Any but I used Overture.
Filament color:
Any but I used Rock.
Filament material:
Any but I used PETG.
Notes:
Print right side up.
I recommend 3 perimeters and 6 top and bottom layers.