LEE 低初始量警告传感器适配器

LEE Low Primer Warning - Sensor Adapter

2024-01-05 03:49:02

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

You need a peep when you run out of primers when reloading? For my LEE presses I use now this:

Adapter to mount a proximity sensor to many LEE reloading presses, e.g. six pack pro, app press or maybe newer pro 1000 with the triangular primer tray (pro 1000 not tested).

The adapter snaps right in the primer-trough of the press and the primer folding tray snaps in on top.

Additional needed parts to make it functional:

Proximity sensor (see description attached)
LED (I used a 5 mm red LED)
Resistor 1 k Ohm (1.000 Ohm)

For wiring see the scheme in the gallery above

Part prints just fine incl. the threads for the sensor. I used a Bambulab A1 mini, 0.4 nozzle, set to fine resolution (0.12 mm) with Bambulab Tough PLA. Supports only on build plate. Part oriented with the threaded connector to the top and the "slide" towards the build plate.

Thanks to db1337 for coming up with this idea! Check out his design:
https://www.thingiverse.com/thing:5756256