米勒-马克斯热插接头支架

Mill-Max Hotswap Receptacle Spacer

2024-01-05 08:18:48

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a spacer for the Mill-Max Hotswap Receptacles since they can have a gap between the switch and the PCB when installed. If this happens and the build doesn't have a switch plate, the switch will not sit correctly.

This design can be improved drastically, but it will work if you need something and they do sit neatly on the PCB. In the FreeCAD file there is a model with the switch pegs that can be made instead, but they're small so printing them can be hard. The included file is just a flat square with 3 holes in it.

If you can get better measurements I would love to see a more accurate version of this. If you can't design it but can get better measurements leave a comment so people can design it for you!