NV-180 RTX-260 AG-2400 VCR专用电池

Battery for NV-180 RTX-260 AG-2400 VCR's

2024-01-05 14:28:42

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Replacement for old lead-acid VCR battery. Despite the fact that this lead acid battery has been used in many VCR's, Camcorders and other equipment, I designed it without having original one on hands, only having VCR for which it was intended, so i can't guarantee it fits anything other than some VCR's:
Blaupunkt RTX-260
Panasonic NV-180 / AG-2400
And other NV-180-like rebranded VCR's.

Battery case holds six 18650 cells connected in 3s2p configuration with BMS (58mm*23mm space available for BMS PCB).

Connector prints with + and - signs facing up, main case prints with text facing hotbed, upper and back lids prints with outer surfaces facing hotbed. No supports needed.

Battery contacts can be made from battery nickel strip.

Last 3 photos from old version

Post-Printing

Assembly order

Cut 5mm wide and ~22mm long nickel strip and bend it 90 degrees 1.5mm from end to get Г-shaped contacts (pink part) which fits in connector piece slits
Glue pre-bent nickel contacts to connector piece.
Glue connector piece with contacts to main case
Glue back cover to main case
Put inside prewelded cells, wire them with BMS and battery contacts
Glue top lid after making shure that everything works as intended.

Important!
Printing main case without signs will lead to bad luck and swollen cells