带有霉菌模具的门闩3D模型

Doorstop with Mold

2024-01-05 17:49:23

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a doorstop I made while following a Fusion 360 tutorial. I also made a mold to cast it out of silicone. Because I don't know what I'm doing in Fusion 360 yet, the mold was made in TinkerCAD. Follow along for more Fusion 360 adventures.

I will post photos and take this out of WIP status after I've cast it in silicone to confirm that the mold actually works.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 S1 Pro
Rafts:
No
Supports:
No
Infill:
20%
Notes:
Printed in TPU for flexibility, but it probably doesn't matter what filament you use. It might be better printed on a textured bed but my textured bed is made out of PEI and I didn't want to risk permanently adhering a doorstop to my print bed.