望远镜支撑架, TS光子 800×203 牛顿

Telescope support, TS Photon 800x203 Newton

2024-01-05 18:45:59

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Telescope holder, protects the collimation and locking knobs of the primary mirror when leaving it in storage. The telescope model is TS Photon 800x203, other Ø 8” Newton telescopes (GSO, SkyWatcher, Bresser) may be compatible, but I don't know.
I considered assembling a single piece with print supports, but I found this solution more fun to carry out. I intend to divide the main pieces so that the set can be printed on small printers, for now it requires at least a printer with size (xy) 25x25 cm
I printed the main parts at 0.20 mm layer height and the screws at 0.16 mm.
The screws that press the tube have holes to finish the tips with hot melt silicone