MP-40 面部保护面具

MP-40 Face Guard

2024-01-05 18:45:59

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Face guard for Ecotech Vortech MP-40 aquarium wavemakers.

The original propeller guard has thin walls with the tendency to break and once they break, the propeller starts to rub on the walls of the cage and with time the wet-side needs to be replaced.

This part be used to replace the broken plastic and prevent propeller damage. Remove the original face guard with a sharp tool and use superglue to attach it to the original cage.

Use 100% infill.
PETG is recommended.

https://youtube.com/shorts/c_EvLOzCPK4?feature=share

Print time is ~36 minutes.

Print Settings

Rafts:
No
Supports:
No
Infill:
100%

Tags

aquarium Ecotech reef tank saltwater Vortech wavemaker

License

CC BY

MP-40 Face Guard
by inventmarine is licensed under the Creative Commons - Attribution license.

MP-40 面部保护面具

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

BF1 单枪手机 08/18型号 Lego
2024-03-23
7英寸HDMI显示器-B外壳
2024-04-01
quest 3 gun stock easy for print with Sholder support (based on fkiliver)
2024-04-05
Ubiquiti UniFi AC Pro 无线接入点支架
2024-04-21
花环戒指
2024-05-08

最新模型