HIKMICRO E01 Eco-V Macro Lens Adapter

HIKMICRO E01 Eco Eco-V Macro Lens Adapter

2024-01-05 21:51:28

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

For Christmas I gave myself an inexpensive thermal imaging camera. So I got it 10% cheaper. I am very satisfied and it is more than sufficient for my needs. Except for the precise diagnosis of pcb electronics.

I found a suitable solution for this: a ZnSe lens with a diameter of 20mm and a focal length of 50.8mm.

HIKMICRO E01 Thermal Camera: (Affiliate Link) https://amzn.to/3twsnxO
HIKMICRO EVO Thermal Camera: (Affiliate Link) https://amzn.to/48I6Scc
Quality ZnSE Lens on Amazon (Affiliate Link) https://amzn.to/3TPcqgF

Find the ZnSE lens on Aliexpress (Affiliate Links):
Cheapest One: https://s.click.aliexpress.com/e/_De0ZPvx
Better One: https://s.click.aliexpress.com/e/_DmCMnyh
Best One: https://s.click.aliexpress.com/e/_DCz7TiH

You can choose from 3 variants:

The Lens Adapter without Clips
The Lens Adapter with fixed Clips
The Lens Adapter with Clips (glue version)

If you need the STEP files, look here:
https://www.printables.com/de/model/706713-hikmicro-e01-eco-eco-v-macro-lens-adapter

I recommend the first one. In my case it holds up well enough. When you push in the adapter plate you can also hear a small clicking noise. When I shake or tap it it doesn't fall out.
If this is not the case for you or you just want to secure it better, you can use one of the variants with the clips.
The lens must be pressed into the adapter plate. If the lens doesn't fit in, just file it up a bit. Normally the lens holds so tightly in the adapter. The ring can still be attached. Possibly with just a little bit of glue. But normally the ring clicks into place cleanly. This also protects the lens somewhat.

Print instructions:

0.4 or 0.6mm nozzle
PLA, PETG or ABS
0.2mm layer high
2-3 perimeters
quality mode
Supports: Only for Version 2 & 3.

Brim: Optional, only if you have adhesion problems.

IF YOU LIKE IT, SUPPORT ME WITH A LIKE, COMMENT, A MAKE OR A TIP <3