K1 磁铁过滤器与排气系统

K1 Magnet Filter and Exhaust

2024-01-05 22:20:22

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This project has 3 parts but you only need 2.

Grid (necessary)
Exhaust Connector (Necessary)
Tip (Optional)

You can still attach a thinner filter between the printer and grid piece but the focus here was to be able to easily attach a 100mm PVC duct that could be easily removed too.

Print Settings

Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10%
Filament brand:
Generic
Filament material:
ABS
Notes:
You can use PLA too but for me ABS is cheaper.

Post-Printing

You will need 8 magnets with 8mm diameter and maximum 1,5mm thickness.
The magnet holes are really tight so you can just push them inside and you don't even need to glue them (you will probably need to use some tool to push them).

How I Designed This

This project was designed using Blender and is based on this one:
https://www.printables.com/model/484827-creality-k1-exhaust-fan-filter-holder
But this is not a remix since I've done everything from scratch.

Tags

creality k1 exhaust exhaust duct

K1 磁铁过滤器与排气系统

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

地心版怪兽型6x18针孔Gamera
2023-03-27
特斯拉Model Y（及Model 3？）座椅轨道末端盖
2024-03-19
Gehäuse für Miboxer Sidoh Bridge Hub MQTT Milight nRF24L01P ESP8266_Milight_Hub
2024-03-24
Lian Li O11 Vision LCD Holder Sensor Panel
2024-04-07
赛tek X52 Pro铝合金框架侧边支架
2024-04-30

最热下载

ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）
2023-03-26
尼克公司仿生假手指V3.5.5版
2023-03-26
Neptune 4 / 4 Pro Cura 切片配置文件与使用教程
2024-05-02
螺旋锥形手玩具（全新）
2024-05-08
巴黎卢浮宫的三圣母像
2025-07-16

最新模型