梅赛德斯E级W212型C级W204型指挥台操控杆支架（紧固螺丝孔）

Mercedes E-Klass W212 C-Class W204 Comand joystick Shaft (tight screw hole)

2024-01-06 02:51:41

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a replacement shaft for the comand joystick module in a Mercedes-Benz W204/W212. The original shaft can be broken easily and causes the scroll function (turning the joystick wheel) to stop working.

After printing the design from Rikjahardhu (see remix source) I noticed that the screw hole is too large for the screw to tap into the PLA. This new design has a smaller screw hole which makes tapping into the PLA possible.

When using this part, make sure that the bottom square hole is large enough (might need to scrape a bit off) such that it sits loosly in the comand module as it needs to be able to move up and down with ease. This ensures that the button can be pressed down.