Steam Deck 立立架

Steam Deck stand

2024-01-06 03:20:02

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I was looking for a nice fold up tablet stand for my steam deck I came across the one jonnig has here https://www.thingiverse.com/thing:3146835 and really liked it.

I took his larg file and modified it some in tinkercad. I added a micro sd card slot in the top so you have a space for a spare card. I also changed the size so it fits in the top rectangle of the stock steam deck case. A small piece of velcro on the back of the stand will hold it in place perfectly.

I printed it out of pla just using the super quality settings on cure. All i changed was my temp, 215 nozzle.

You can print it without supports but i watched the print till it was ready to do the first layer of the sd card slot and i laid an old junk micro sd card in it for support. I printed a second one and didnt do that and had to take an exacto knife to clean the slot out.

Hope you enjoy, definitely check out the original file from Jonnig.