运动球壁挂架

Sports Ball Wall Mount

2024-01-06 04:02:50

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is my version of a wall mounted holder for sports balls. Pictured with a size 5 soccer ball but it will fit most balls up to and including a full size basketball.

It can mount using its keyhole hanger on one screw, size #6 or similar. The screw depth should be adjusted just far enough from the wall to create a friction fit on the keyhole so it doesn't rotate (you can start with about 2mm and tighten from there). I like to set it a slightly snug, and then rotate the mount itself one full turn clockwise to lock the screw in tight.

If that is not effective enough for you to keep it from rotating, you can put an optional second screw in the wall below the first one at a distance between 19mm and 25mm (¾" and 1"). The lower screw can be driven all the way to the wall, as it is received by a slot instead of a keyhole to keep the mounting as easy as possible.

I used 3 wall loops and about 15% infill. No supports needed, I used ASA filament but I think it should be fine with PLA too.

Open license with attribution, sell them if you like but don't take off the watermark or else it might not work anymore. ;D