WW! 和 WW2 飞行站台 1/144 比例模型

WW! and WW2 Flight Stand for 1/144 scale

2024-01-06 06:11:04

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The flight stand was designed to play Canvas Eagles using 1/144 scale WW1 planes. I metal nail is drilled and glued to the underside of the plane so that only rhe nail head is showing (use a tiny nail that sticks to a magnet). The clear rod was purchased from Amazon (https://www.amazon.com/dp/B097Z89YW3?ref_=cm_sw_r_cp_ud_dp_TWVN99W2N9N5TBFX6R4H)

Although you can snap it together it is best to press onto the flight stand sufficiently to grab the rod but not press it all the way in in order to make the raising and lowering easier. The tight fit is designed to make sure models dont fall down. There is small magnet at the tip of the clear rod which you can then attach a plane easily and safely. Attaching smoke is easily done by adding a paperclip inside the cotton trail. The paper clip reinforced (concealed) can then be attached to the magent for a realistic smoke trail.