皮卡丘 3D 模型

Pokemon Pikachu

2024-01-06 10:15:59

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Get Free Ticket!
If you sign up as a new member at fab365.net and leave a comment with your registered account email address, you will receive a "Free Item - Download Ticket" that can be used at Fab365!

When you sign up for fab365.net, you will receive one “Free Item - Download Ticket” immediately, and you can receive one more by leaving a comment here.

If you were asked to choose one of the most loved game characters, many people would probably choose Pikachu from Pokemon. That is why so many of them are made for 3D printing. However, it is difficult to express the characteristics of hand-drawn animation and early game graphics in three dimensions. Therefore, although there are many Pikachus designed for 3D printing, 3D printed Pikachu often does not reflect the original form well as a movable form.
So this time, I designed it so that it could move but still reflect the characteristics of the original painting.

We designed it so that as many parts as possible, including ears, head, arms, legs, and tail, could move, while trying to reflect the feel of 2D animation and drawing as much as possible.

Although there are some regrets, I think the design has been completed in a way that is close to the original intention.

It has few parts and is very easy to make, but there are a few caveats.

The tail is divided into two parts. When attaching them, please pay attention to the shape before attaching them. Otherwise, it may end up being reversed.
The support inside the head must be cut, removed and assembled.
The left and right pupils are different, so you need to pay attention to the angle before attaching them.
The left and right sides of the ball are different, so check carefully before attaching.

This time, I felt once again that designing 2D into 3D is very difficult, and I hope that this effort will lead to a positive response from many makers who love Pokemon.

Largest part in printing, size = X 63mm, Y 89mm, Z 49mm, After full assembly size= X 69mm, Y 45mm, Z 99mm

Total Build Time : 9h 25m / Plastic Weight : 41g