墙上挂板装饰品
Plate Holder wall hanging
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This plate holder works for a small decorative plate and is set to be printed with minimal waste.
I do not know if the holder would be capable of holding larger plates if scaled up due to weight concerns.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 v2
- Rafts:No
- Supports:Yes
- Resolution:NA
- Infill:NA
- Filament brand:
NA
- Filament color:
Gold
- Filament material:
PLA
- Notes:
I printed this after printing a large project that stuck to my build plate pretty badly and the first few layers seemed to be very very thin/too close to the build plate, I likely need to recalibrate my printer. Just in case it wasn't an out of level print bed, definitely check your printer settings and watch the first few layers.
The support that it puts in the keyhole was pretty easy to remove on my print.
The support that it used for the cross brace was only a single layer thick, I was afraid it wouldn't make it to the top but it did. You may want to add a vertical support of your own if you encounter errors when printing.
相关内容
猜你喜欢
联系我们
热门推荐
-
二战时期德国的可移动防弹室3D模型2023-03-28 -
GMX曲线支架支持GoPro安装（或轻型结构）2023-05-22 -
简单而深刻的香炉碗设计2023-06-20 -
3D聚乙烯贴纸2024-04-05 -
10cm 曲奇形状模具2024-04-20
最热下载
-
钥匙解码器（用于房门钥匙复制）2023-03-26 -
GMX曲线支架支持GoPro安装（或轻型结构）2023-05-22
-
猫咪零食球2024-03-29 -
18650电池存储盒2024-04-18 -
GLOCK 17型手枪2024-05-03
最新模型
-
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
性感美女3d人像（带基座）2025-07-17 -
鞋带锁2025-07-17 -
真实玩偶 / 镶有凸圆形玻璃参数的眼睛2025-07-15
