NCASE M1 Evo修订版机箱风扇支架

(Revised) NCASE M1 Evo Tower Cooler Fan Bracket

2024-01-06 13:07:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

What Is It and Why?

This is a revised design of the NCASE M1 Evo Tower Cooler Fan Bracket that W360 released (the source file and additional info from NCASE may be found here). It is meant to allow a side 120mm or 140mm fan to be installed in the Evo when using a tower-style CPU cooler. I used an inverted reference layout on my Evo (graphics card mounted horizontally on the top portion of the case), and I found that the original fan bracket:

Had misalignment between the top left mounting hole and the front panel's mounting hole
Had misalignment with bottom right mounting hole and the bottom panel's slots
Interfered with my 180° adapter for my graphics card power cables
Had a fan opening that was slightly smaller than my 140mm fan blade diameter (not ideal for quiet airflow)

...so I made this design to fix these issues.

Additional Parts

QTY 1 of M3 x 5mm screw (4mm would probably also work)
QTY 2 of M4 x 6mm screws (note mine had a pitch of 0.7mm)
(optional) QTY 2 of rubber spacers for the M4 screws

Special Notes

I have NOT tested this design in the "standard" reference layout (graphics card mounted horizontally on the bottom portion of the case), however I believe it should work for both "inverted" and "standard" layouts.
I provided the raw .prt (CAD) file I used to generate the STL file, so feel free to modify it as you see fit.

This is a revised design of the NCASE M1 Evo Tower Cooler Fan Bracket that W360 released (the source file and additional info from NCASE may be found here). I used an inverted reference layout on my Evo (graphics card mounted horizontally on the top portion of the case), and I found that the original fan bracket:

Had misalignment with the front panel's mounting hole
Had misalignment with the bottom panel's slots
Interfered with my 180° adapter for my graphics card power cables
...so I made this design to fix these issues.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 S1 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2 mm
Infill:
30%
Filament brand:
Hatchbox
Filament color:
Black
Filament material:
PLA

Post-Printing

Due to how I printed the bracket there was a fair amount of support material to remove. I found that using a pliers helped remove the more stubborn remaining bits.