主线缆固定装置（适用于Ender5/5+型号打印机）
Main Cable Holder for Ender5/5+
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
The simplest and most effective cable holder.
I was tired of the main cable flopping about and all the solutions I've seen have been too elaborate. This is made just like me, simple.
Print this with whatever settings you like. I printed at 100% infill because I forgot to change it. Best printed on it's side with no supports, worked just fine. As you can see it fit perfectly behind the axis stepper.
A side note: When I print bolt holes I always make them smaller so I can drill them out for a more snug fit. So I suggest a nice sharp 4mm drill bit OR jump on your slicer and make them bigger there. It's your world.
extra bits needed:
M4x10 x 2
T-Nut x 2
Cable Ties x as many as you like.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-5 Plus
- Rafts:No
- Supports:Doesn't Matter
- Resolution:.02
- Infill:100
- Filament brand:
Creality
- Filament material:
PLA
相关内容
联系我们
热门推荐
-
六边形金字塔2023-03-26 -
地心版怪兽型6x18针孔Gamera2023-03-27 -
HWS用参数化偏移钥匙孔钩2024-04-13 -
赛tek X52 Pro铝合金框架侧边支架2024-04-30
最热下载
-
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
螺旋齿轮玩具3D模型2023-03-26 -
「春雷」弹壳弹出式泡沫飞镖发射器（进行中）2023-03-26 -
拒绝的手势2024-04-19 -
HGX lite v2支架2025-07-18
最新模型
-
泡泡底拖鞋2025-07-17 -
巴黎卢浮宫的三圣母像2025-07-16 -
碧奇公主；桃子公主；水蜜桃公主2025-07-16 -
坏龙家的大宝贝女生别下2025-06-26 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24