5mm基础像素插槽

5mm Seed Pixel Socket

2024-01-06 21:57:07

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Remixed Franks Seed Socket to better fit my seed pixels that have a wider gap needed to fit into the socket. Additionally, I made the push through top wider so that it sticks better into coro props / HDPE props from Gilbert Engineering

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu P1P
Rafts:
No
Supports:
No
Resolution:
.20mm
Infill:
100
Filament brand:
Bambu Labs PETG
Filament color:
transparent
Filament material:
PETG
Notes:
Can fit 12 on a 250x250 build plate to create 120 (10x per slot). I have them combined in groups of 10 so that I can easily store and use them plus if one fails, Bambu Labs only allows ~60ish objects on the plate for excluding objects that fail mid print.

On the P1P stock settings for PETG - can print 12 of these (120 total) in 2:30.

By my math, I need 4,680 of these so about 100 hours of printing if no failures happen because I was lazy and didnt clean the build plate...