Neptune 4 Trust Trino HD Webcam (18679) 可安装 Ausdom 兼容型号
Neptune 4 Trust Trino HD Webcam (18679) Mount (Ausdom Compatible)
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a remix of Mr_Meaty's MS Lifecam Studio mount, modified to fit the Trust Trino 18679 Webcam.
It will actually fit some others too, such as my Ausdom 1080P camera and many others using the same rubber mount.
To fit the camera to the mount, remove the 2 screws holding the plastic part of the camera base to the rubber bendy bit, reuse those screws by dropping them down the channels on the printed part.. and screw them back into the plastic base which should fit into the end of the mount as shown in the photos.
Slip it over the X Axis gantry and you are done.
The modified file is on Tinkercad here if you want to remix it further: https://www.tinkercad.com/things/9PJ4iwHsvoC-neptune-4-trust-trino-hd-webcam-18679-mount
Print Settings
- Printer:
Elegoo Neptune 4 Pro
- Rafts:No
- Supports:No
- Filament brand:
3D Solutech
- Filament color:
Orange
- Filament material:
PLA
- Notes:
Sliced with Orca Slicer default Neptune 4 Pro profile.
Prints laid on its side (as in the STL) and works straight off the bed.
Tags
相关内容
猜你喜欢
联系我们
热门推荐
-
ESP8266与OLED 1306案例分析2023-09-16 -
Z轴偏移测试2024-03-28 -
Apple Vision Pro磁吸充电盒3D模型2024-04-18 -
一加开放版双模式手机支架2024-04-20 -
BHI改进型战车模型2024-04-30
最热下载
-
弓箭和投射器战车前轮2023-04-12 -
Nissan S13 Silvia BN 运动装备套件 RC车身 1:10 3件2023-08-23 -
空客操纵杆配备控制杆固定装置2024-03-30 -
Ubiquiti UniFi AC Pro 无线接入点支架2024-04-21 -
用于Raspberry Pi高质量摄像头的D型安装适配器2024-05-08
最新模型
-
骷髅鸭2025-05-16 -
伊比休鸽子鸨夫2024-05-08 -
3D模型 GTX 750 GIGABYTE2024-05-06 -
ZOHD Dart 250电池托盘2024-05-06 -
Ninja空气炸锅替换手柄2024-05-06