道路沟渠标准模板

Road Gutter Templates

2024-01-07 03:41:53

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Use this set of templates to mark out the concrete road gutters for a 1-in-20 scale layout. The nominal height of the gutter/sidewalk is 3mm. You may rescale the templates to suit your requirements.

The following files are provided:

Corner Radius - to mark out street corner for cutting - nominal radius of 37.5mm, 90 degree corner.
Corner Gutter - to mark out curved gutter on sidewalk and roadway levels - markings at 15 degree increments. Use marking divisions that you require.
Straight Gutter - 100mm and 200mm lengths, use longest you can print - for marking out gutter on sidewalk and roadway levels - markings at 50mm intervals.

Print in the default orientation - largest flat surface on machine bed. Supports are not required.

To use in your diorama:

Cut straight sections of your sidewalk.
Using the corner radius template, mark out and cut the sidewalk corners.
Smooth the edges using sandpaper and glue the sidewalk sections to your baseboard. Allow glue to set.
Use the templates to mark the division between the gutter and the road/sidewalk. Use a thin HB pencil - a 0.5mm clutch pencil is ideal.
Mark out the transverse lines.
Use a Dremel (or equivalent, saw, file, knife, chisel, etc.) to engrave the marked lines.
Add physical wear and tear on your diorama.
Apply texture and paint to the road and sidewalk.