Ridgid/AEG电池到Milwaukee兼容器适配器

Ridgid / AEG to Milwaukee Battery Adapter

2024-01-07 06:49:12

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Ridgid/AEG电池到Milwaukee兼容器适配器

Ridgid/AEG电池到Milwaukee兼容器适配器

Summary

Adapter from Ridgid / AEG Batteries to Milwaukee Tools

Print with supports (I use tree supports)
I recommend using plenty of infill. 20% minimum.
I print these using PETG
There are two versions of the Milwaukee plate included. One is offset which allows batteries to fit in tools with 'pockets' like the chainsaw and the other is more space efficient which may work better with other tools.
The Ridgid side requires the official TTI socket which can be ordered from part number 270015155. I purchase them for less than $10 CAD from my local service center
The locking mechanism for the Milwaukee side is semi-permanent. Two screws are used to secure the locking tabs. There is no spring loaded mechanism.
Use 14ga household copper wire for contacts on the milwaukee side. You may need to tweak the bend to get good contact. When soldering sink the wire into the print slightly to secure it. Ensure it lays flat on the top to prevent jamming.
A 1megaohm resistor is used between B+ and the sense pin on the tool. If this contact is not made the tool will not work. Ideally this would be done with a 3.3v regulator but this resistor seems to work fine.
Assembly is done using Imperial 4-20 bolts and nuts. You will need to trim the bolts to size. Ensure you put a nut on the bolt before trimming to repair the threads.

Let me know if you have any questions, I'll try my best to answer.

See my other ridgid projects:

Soldering Station https://www.thingiverse.com/thing:4785264
Dewalt Adapter https://www.thingiverse.com/thing:4703651
Variable Power Supply https://thingiverse.com/thing:4755827

License

CC BY-NC

Ridgid / AEG to Milwaukee Battery Adapter
by Loafdude is licensed under the Creative Commons - Attribution - Non-Commercial license.

Ridgid/AEG电池到Milwaukee兼容器适配器

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

QC USB充电器外壳（XFW-KC42-4）
2024-01-17
NA Miata车灯遮光条折叠机构顶盖
2024-04-15
Woods Mower 30922 护盾保持者
2024-04-24
育苗盆-连续自动浇水系统（符合欧盟标准的密封水瓶）
2025-07-25
Myuto Flick 19X - 可工作的玩具枪（橡皮筋弹弓状枪）
2025-08-17

最新模型