凯约成功前臂部件
Kyosho Triumph Front Arm
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Front arm for the Kyosho Triumph (TM-5).
This is a slightly modified version of the original arm. It is pretty close but has been modified to make it easier to print. I have also added a little more material was added around the shock mount area and inner sections, along with slight changes to the main geometry.
Ream the hinge pin areas with a 3 mm drill bit. Tap the shock mounting area with a M3 tap.
NOTE: I have not yet printed to fully confirm fitup and sizing. Drawing 1:1 overlay seemed to be correct. I may make a version at some point that is a non-webbed version.
Tags
License
Kyosho Triumph Front Arm
by rcnand is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
猜你喜欢
联系我们
热门推荐
-
Mobula 6盒3D模型2024-01-17 -
经典Laverda钥匙链车锁2024-03-17
-
Zojirushi 米饭煮锅露水收集装置2024-03-21 -
3D椭圆曲线模型2025-05-29 -
乔思博 NF-2和NF-1 DRAM/VRM散热器基板参考2024-04-23
最热下载
-
车身RC 1/10 全套2023-03-26 -
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
Flex Dino钥匙链2023-03-26 -
Dado - 立方体模型2024-03-24 -
Neptune 4 / 4 Pro Cura 切片配置文件与使用教程2024-05-02
最新模型
-
FPV遥控纸飞机（机身）STL 3D模型2025-09-16 -
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
龙珠孙悟空，无需支撑2025-07-19 -
FLsun SR HGX Bambu直接驱动挤出机2025-07-18 -
关节活动人，假人13,Dummy 132025-07-02