丰田逍遥森林者支撑结构部件3D模型

Subaru forester strut dust cap

2024-01-07 10:53:45

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

strut dust cap for Subaru forester. I designed it based on my 3rd gen forester, but based on images it appears that it would work on other generations too, but I don't have a way of checking. If anybody has a different generation or different model, I would be interested to know if it fits:)

This is a tight fit and is designed to be printed with a flexible filament (I use TPU) so that the sides can squish a bit and seal better when inserted, will not work well at all using PLA or ABS.

Print Settings

Rafts:
No
Supports:
No
Resolution:
0.12mm
Infill:
70%
Filament brand:
any
Filament material:
TPU or other flexible material
Notes:
smaller nozzle size is good for this print in order to properly print the rings on the outside. 0.4mm or smaller is good.

print upsidedown to avoid the need for supports