壁挂式水冲器托盘

Bidet Toilet Sprayer Holder, Wall Mount

2024-01-07 12:05:08

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I designed a simple bidet sprayer holder that could be affixed to the wall within easy reach.
For easier printing, the STL file has both parts already laid out (some assembly required). No supports or adhesion options should be needed.

You'll need a few things to assemble and mount this holder:
2x large command adhesive strips
2x M3 5mm threaded heat set inserts
2x M3 8mm bolts

Assembly:

Use a soldering iron set to 214 degrees celsius to slowly press the threaded inserts into the 2 holes on the back of the holder piece.
Thread the 2 bolts through the back of the flat backplate, so the head of the bolts are sunken into the bore and flush with the back surface. Tighten the 2 parts together until they are snug.
Apply the 2 Command adhesive strips to the back of the flat backplate so the pull tabs are still accessible, in case you want to remove the holder later.
Find a position for the holder that works for you, and press it to the wall where you would like to mount it. You should probably let the adhesive settle in for an hour before hanging your bidet sprayer on it.

Estimated print time for a sonic pad using the fast PLA preset is 24 minutes.